Mango juice extractor machine also named at duplex screw continuous juicer pressing equipment of mango, work process is: the conveying screw of automatic mango juice pressed machine will feed the material box into squeezing screw, decreased by squeezing screw pitch and diameter of axle, and under the action of cone resistance and screen wall, make the mango material of the liquid content be squeezed out, out of the liquid outflow from the mesh, concentrated in the juice into the bucket.
The mango residue after squeezing will be outlet from between the end of the cylindrical screen and conical body, conical spring will be loaded at the back of the mango juice extractor machine body, by adjusting the spring pre-tightening force and position, we can change the size of the resistance and slag notch, this design will be used to adjust the squeezing degree of dry and wet.
Mango juice extractors machine main includes feeding port and sieve tube, pressed screw which adopts high-quality 304 stainless steel materials.
High juice yield rate mango juice pressed machine including shell, lower part three layers of fixed broken knife set, and each layer has six fixed broken blade, the shell bottom center fixed mesh fixed plate will be installed. Mango juice making machine has reasonable structure design, removable, juiced with high efficiency and low noise etc. By setting the mango breaking mechanism, it will increase mango juice pressed rate; by setting the top institutions, it can reach the purpose of improve the efficiency of cutting, removing mango nuclear.
Good quality mango deseeding and pulping machine, there’s transmission system, bearing seat, sleeve shaft, cylinder back cover, block plate, cylinder body, spline shaft, screen, scraper (or beater bar), cylinder front cover, frame, etc.
