Mango pitting and pulping machine have two functions: mango core stone removed and pulped. It have a wide application for handling peach, pear, apple, plum, apricot and any other with nuclear fruits.
This new design mango stone removing and pulping machine is composed of machine stainless steel frame, transmission system, bearing, scraper plate and screen etc. Functions main includes core seed removal, fruit skin remove and pulped.

The working principle is: the mango from fruits and vegetables are rotated with the beating board in the cylinder body, squeezed and scraped while crushing the mango, and the fruit cores, seeds and thin skins are separated. Combined transportation of multiple beaters in series, installed in the same frame, driven by a motor, called linkage. Combined transportation, each beater screen barrel hole size is different before the passage of the passage, that is, a finer than a fine. The shell of the mango pitting and beating machine is an oval groove with a partition wall, and one side is equipped with a flying knife roller and a fixed bottom knife. Wet pulp circulates in the machine, through the effect between the flying knife and the bottom knife and is cut horizontally, longitudinal filature, crushing, moistening swelling, etc., Finally the mango paste will be produced.


Characteristic
1. A variety of mango threshing machine screen aperture selection (φ 0.35- φ 8mm).
2. It can be combined on the complete process line, also it can be used independently. The related mango equipment main have mango washing machine, mango paste pasteurizer machine, mango homogenizer etc.
3. Parts of mango beating and pulping machine material are made of stainless steel, which is suitable for food hygiene.
4. Mango threshing machine not only fits the applicable scope of the threshing machine, but also applies to all kinds of stone fruits threshing and beating respectively.
|
Model |
Function |
Capacity |
Power |
Dimension |
|
TGS-DJ2-4 |
Pulped |
4t/h |
7.5kw |
1535*1420*1533mm |
|
TGS-DJ3-7.5 |
7.5t/h |
18.5 kw |
1935*2275*1700mm |
|
|
TGS-PDJ2-4 |
Pulped with Crusher |
4t/h |
5.5kw |
1535*1420*1733mm |

Hot Tags: mango pulped machine, China mango pulped machine manufacturers, suppliers, factory, Automatic Pineapple Peeler Machine, Economic Pineapple Cutting Machine, Pineapple Peeler Decore, Automatic Pineapple Peeling Machine, Small Sized Pineapple Peeler, Pineapple Mango Process Machine











