Single Screw Fruit Juice Extracting Machine

Fruit juice extractor machine, it have single screw fruit juice pressing and extracting machine type and double screw pressing juice pressed model equipment, different fruits, the juicing pressure is different, and the machine price is different.

Single screw fruit juice extracting and pressing machine is a normal equipment for juice products. good machine can improve work efficiency and economic benefit, the fruit juice extracted machine, it can be used for pressing tomato, pineapple, apple, orange etc.

The composition and the use characteristic of single spiral screw fruit juicing extractors machine.

1. Spiral single fruit juice extracting machine into main have the hopper, screw axis, screen pack, gravy, after bearing, slag trough and other parts.

2. The left end of the spiral spindle is supported in the rolling bearing housing, and the right end is supported in the hand wheel bearing housing. The motor drives the spiral shaft through a pair of belt wheels to run.

3. The spiral shaft of the spiral juicer rotates clockwise along the outlet direction of the material and slag, and the bottom diameter is gradually increased while the pitch is gradually reduced. When the material is pushed by the spiral shaft, the spiral cavity is gradually reduced, thus forming the pressing of the material.

Henan Tigers Machinery Co., Ltd can produce fruit and vegetable processing equipment vegetable equipments. The single screw fruit juice making extracting machine and the special design, compact structure, beautiful and easy. You could use this type pressed machine with crusher device for the fully automatic complete the crushing, juicing, slag discharge process.

Screw pressing machine have a large working capacity, high rate of juice, high efficiency and energy saving, low noise, no pollution. All of parts contacting with materials for stainless steel material;

1. The single screw fruit juice presser and extracting automatic process machine shall be installed horizontally and fixed with anchor screws.

2. When the juice pressed fruit processing equipment is started, the rotation direction of the motor should be consistent with the marked arrow on the belt pulley cover, and the indenter should be adjusted to make the ring clearance to large, then the clearance gradually reduced, to meet the technical requirements, and then the brake fixed hand wheel bearing seat position.

3. Feeding must be uniform, hard foreign matter is prohibited to enter the hopper, so as not to damage the screen.

4. The bearing is replaced regularly with grease, and the normal service temperature of the bearing is less than 80℃.

5. Wash the filter with water and brush after each shift. If the fruit juice with more fiber is filtered, it must be washed once more according to the production situation

Finally, after pressing the whole machine with hot water cleaning.

How about the juice rate for this type single screw fruit juice extractors pressed machine?

Generally, the juice yield rate can reach 75%-78%. But it will depends on your processing material. Different material have different extracting rate.

Hot Tags: single screw fruit juice extracting machine, China single screw fruit juice extracting machine manufacturers, suppliers, factory, Fruit Pulped Machine, Apple Fruit Juice Extractors, Stainless Steel Fruit Pulping Machine, Strawberry Cutting Machine, Fruit Hammer Crusher, Mango Pulped Machine