Ginger Cleaning Machine

Ginger cleaning machine, we have brush type washed machine and rotate drum type washed machinery with different working capacity.

Henan Tigers Machinery Co., Ltd brand ginger washing machine, also named at brush type ginger cleaning and peeling machine. It is mainly composed of motor, transmission, 8-1pieces brushes, etc., The ginger washing and cleaning process machinery designed and manufactured by using brushes working principle, this type ginger washers and cleaners machine is widely used in ginger, pickled ginger, fresh ginger, old ginger and other type gingers cleaning and peeled.

The cleaning and washed ginger process machine can be cleaned alone to finish the cleaned and peeled at the same time. The ginger washing and cleaning equipment is beautiful in appearance, easy to operate, large cleaning (peeling) for ginger volume, high efficiency, low energy consumption, cleaned ginger job can work continuously. Brush roller material by special processing, durable, equipment made of stainless steel.

1. The food contact part of this ginger cleaners washers machine is made of stainless steel SUS304 material, which fully meets the hygienic requirements of export food.

2. Wide application for different type fruits and vegetables such as ginger, carrot, yam, potato, sweet potato, kiwi fruit and other root vegetables cleaning, peeling.

3. Easy operate and maintenance for the good quality ginger cleaning machinery

4. The ginger cleaning washer processing machine also can equipped with a 0.75KW circulating water pump to enhance the spray flow and pressure, so that the cleaning effect will be better, also you could use it alone.

How to use this type ginger cleaning washed and peeled equipment?

Firstly, The motor of this cleaned ginger equipment use 220v/380V or customization voltage three-phase power supply, which must be connected by professional electricians. Non-licensed personnel are not allowed to work.

1. Connect the power cable. The corresponding link should be based on the label of the power supply. Do not misconnect 380V to 220V. (Note: After connecting the wire, try turning to check whether the reducer motor is reversed)

2. Turn on the main power switch. The main power switch adopts emergency stop switch design to prevent accidents. The device can be stopped in an emergency.

3. Start motor switch. When working normally, start the motor first, turn on the water source switch so that the spray pipe reaches the spray state and then start feeding!

4. The two brake wheels should be fixed when working normally.

Secondly, Attention tips during operation for multifunctional automatic ginger washing process machine:

1. Each connection part must be tightened, and regularly check whether the solid bolts are loose.

2. The installation position of the ginger cleaning and washing equipment should be selected in the place where the discharge is more convenient.

3. The tightness of the belt and chain should be checked regularly and adjusted in time.

4. The cleaning and peeling ginger production equipment should regularly check the lubrication of all moving parts, such as transmission chain and bearing seat, and timely add butter.

5. If the pump fails, please refer to the pump instruction.

Hot Tags: ginger cleaning machine, China ginger cleaning machine manufacturers, suppliers, factory, Ginger Brush Peeling Machine, Ginger Process Machine, Commercial Ginger Slicing Machine, Ginger Cleaning Machine